product informatin is current as of publication date. the product conforms copyright ? 2005, pletronics inc. to specifications per the terms of the pletronics standard warranty. production processsing does not necesarily include testing of all parameters. -160 -140 -120 -100 -80 -60 -40 -20 0 20 40 60 80 100 120 140 160 -60 -40 -20 0 20 40 60 80 100 120 temperature ( o c) deviation (ppm) sm10t series miniature smd crystal october 2005 ? pletronics? sm10t series is a miniature surface mount crystal. package is ideal for automated surface mount assembly and reflow practices. tape and reel packaging 16 mhz to 60 mhz 2.5 x 3.2 mm 4 pad at cut fundamental crystal ideal for use in hand held consumer products pletronics inc. certifies this device is in accordance with the rohs (2002/95/ec) and weee (2002/96/ec) directives. pletronics inc. guarantees the device does not contain the following: cadmium, hexavalent chromium, lead, mercury, pbb?s, pbde?s weight of the device: 0.06 grams moisture sensitivity level: 1 as defined in j-std-020c second level interconnect code: e4 electrical specification : item min max unit condition frequency range 12 60 mhz calibration frequency tolerance 10 50 ppm at +25 o c + _ 3 o c, see part number for options frequency stability 3 150 ppm see part number for available options equivalent series resistance (esr) - 100 ohms to 30 mhz - 50 ohms above 30 mhz drive level - 100 w use 10 w for testing shunt capacitance (c0) - 5 pf pad to pad capacitance aging at 25 o c + _ 3 o c -5 +5 ppm /yr for the first year -2 +2 ppm /yr after the first year operating temperature range -40 +125 o c see part number for available options storage temperature range -55 +125 o c at cut crystal frequency versus temperature typical performance:
sm10t series miniature smd crystal october 20 05 www.pletronics.com 425-776-1880 2 part number: sm10t -18 -16.384m -20 e 1 l k -xx see chart below for available options internal code or blank highest specified operating temperature a = 40 o c g = 70 o c n = 100 o c b = 45 o c h = 75 o c p = 105 o c c = 50 o c j = 80 o c r = 110 o c d = 55 o c k = 85 o c s = 115 o c e = 60 o c l = 90 o c t = 120 o c f = 65 o c m = 95 o c u = 125 o c lowest specified operating temperature a = +10 o c f = -15 o c l = -40 o c b = +5 o c g = -20 o c m = -45 o c c = 0 o c h = -25 o c n = -50 o c d = -5 o c j = -30 o c p = -55 o c e = -10 o c k = -35 o c fundamental mode at cut crystal frequency stability see chart below calibration frequency tolerance 10 = + _ 10 ppm at 25 o c + _ 3 o c 15 = + _ 15 ppm at 25 o c + _ 3 o c 20 = + _ 20 ppm at 25 o c + _ 3 o c 50 = + _ 50 ppm at 25 o c + _ 3 o c frequency in mhz cload in pf parallel resonance from 06 to 32 pf or sr = series resonance model number available frequency stability versus temperature in ppm operating temperature range abcdefghjk code + _ 3.0 + _ 5.0 + _ 8.0 + _ 10 + _ 15 + _ 20 + _ 30 + _ 50 + _ 100 + _ 150 0 to +45 o c cb ! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! ! 0 to +50 o c cc ! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! ! 0 to +60 o c ce ! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! ! 0 to +70 o c cg ! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! ! -10 to +50 o c ec ! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! ! -10 to +60 o c ee ! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! ! -10 to +75 o c eh ! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! ! -20 to +70 o c gg ! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! ! -20 to +75 o c gh ! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! ! -30 to +75 o c jh ! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! ! -30 to +80 o c jj ! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! ! -30 to +85 o c jk ! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! ! -35 to +80 o c kj ! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! ! -40 to +85 o c lk ! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! ! -40 to +90 o c ll ! ! ! !! ! ! !! ! ! !! ! ! !! ! ! !! ! ! ! -40 to +105 o c lp ! ! ! !! ! ! !! ! ! !! ! ! !! ! ! ! -40 to +125 o c lu ! ! ! !! ! ! !! ! ! !
sm10t series miniature smd crystal october 20 05 www.pletronics.com 425-776-1880 3 legacy part number (not for new designs): sm10t b e -18 -23.45m -xx internal code or blank frequency in mhz cload in pf parallel resonance from 6 to 32 pf or sr = series resonance operating temperature range blank = 0 to + 70 o c e = -40 to +85 o c calibration tolerance / frequency stability blank = 30/50 b = 30/30 series model reliability: environmental compliance parameter condition mechanical shock mil-std-883 method 2002, condition a vibration mil-std-883 method 2007, condition a solderability mil-std-883 method 2003 thermal shock mil-std-883 method 1011, condition a package labeling label is 1" x 2.6" (25.4mm x 66.7mm) label is 1" x 2.6" (25.4mm x 66.7mm) font is courier new font is arial bar code is 39-full ascii
sm10t series miniature smd crystal october 20 05 www.pletronics.com 425-776-1880 4 3 2 3 4 1 4 2 1 4 3 mechanical: inches mm a 0.098 + _ 0.004 2.5 + _ 0.1 b 0.126 + _ 0.004 3.2 + _ 0.1 c 0.028 max 0.7 max d 1 0.028 0.7 e 1 0.004 0.1 f 1 0.035 0.9 g 1 0.035 0.9 h 1 0.047 1.2 contacts : gold 11.8 inches 0.3 m minimum over nickel 50 to 350 inches 1.27 to 8.89 m not to scale 1 typical dimensions j 1 0.004 0.1 connection (top view): pad 2 and pad 4 are common and connected to the metal cover. they are not connected to the crystal. layout and application information trace lengths to the crystal should be kept as short as possible. the crystal connections are sensitive to noise. the package should be grounded for optimum performance, pad 2 and/or pad 4 connected to ground. marking marking consists of the frequency (may be truncated due to package size) orientation of marking may be mixed on the tape traceability of part is lost once removed from reel
sm10t series miniature smd crystal october 20 05 www.pletronics.com 425-776-1880 5 260c maximum 10 seconds maximum 215c10c approximately 50 seconds allowed rate of temperature change maximum 4c per second 120 to 160 seconds 100 150 200 250 temperature (c) 175c10c reflow cycle (typical for lead free processing) the part may be reflowed 2 times without degradation. tape and reel: available for quantities of 250 to 3000 per reel (<1000 will be cut tape) constant dimensions table 1 tape size d0 d1 min e1 p0 p2 s1 min t max t1 max 8mm 1.5 +0.1 -0.0 1.0 1.75 + _0.1 4.0 + _0.1 2.0 + _0.05 0.6 0.25 0.1 12mm 1.5 16mm 1.5 2.0 + _0.1 24mm 1.5 variable dimensions table 2 tape size b1 max e2 min f p1 t2 max w max ao, bo & ko 8 mm 3.5 6.4 1.7 + _0.1 4.0 + _0.1 1.0 8.9 note 1 note 1: embossed cavity to conform to eia-481-b dimensions in mm not to scale reel dimensions a inches 7.0 10.0 13.0 mm 177.8 254.0 330.2 b inches 2.50 4.00 3.75 mm 63.5 101.6 95.3 tape width c mm 13.0 +0.5 / -0.2 d mm 16.4 +2.0 -0.0 16.4 +2.0 -0.0 16.4 +2.0 -0.0 16.0 mm --- --- 24.4 +2.0 -0.0 24.0 mm --- --- 32.4 +2.0 -0.0 32.0 reel dimensions may vary from the above
sm10t series miniature smd crystal october 20 05 www.pletronics.com 425-776-1880 6 important notice pletronics incorporated (ple) reserves the right to make corrections, improvements, modifications and other changes to this product at anytime. ple reserves the right to discontinue any product or service without notice. customers are responsible for obtaining the latest relevant information before placing orders and should verify that such information is current and complete. all products are sold subject to ple?s terms and conditions of sale supplied at the time of order acknowledgment. ple warrants performance of this product to the specifications applicable at the time of sale in accordance with ple?s standard warranty. testing and other quality control techniques are used to the extent ple deems necessary to support this warranty. except where mandated by specific contractual documents, testing of all parameters of each product is not necessarily performed. ple assumes no liability for application assistance or customer product design. customers are responsible for their products and applications using ple components. to minimize the risks associated with the customer products and applications, customers should provide adequate design and operating safeguards. ple does not warrant or represent that any license, either express or implied, is granted under any ple patent right, copyright, artwork or other intellectual property right relating to any combination, machine or process which ple product or services are used. information published by ple regarding third-party products or services does not constitute a license from ple to use such products or services or a warranty or endorsement thereof. use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from ple under the patents or other intellectual property of ple. reproduction of information in ple data sheets or web site is permissible only if the reproduction is without alteration and is accompanied by associated warranties, conditions, limitations and notices. reproduction of this information with alteration is an unfair and deceptive business practice. ple is not responsible or liable for such altered documents. resale of ple products or services with statements different from or beyond the parameters stated by ple for that product or service voids all express and implied warranties for the associated ple product or service and is an unfair or deceptive business practice. ple is not responsible for any such statements. contacting pletronics inc. pletronics inc. 19013 36 th ave. w, suite h lynnwood, washington 98036-5761 usa tel: 425-776-1880 fax: 425-776-2760 e-mail: ple-sales@pletronics.com url: www.pletronics.com copyright ? 2005, pletronics inc.
|
